Description
Motionics VibeSense wireless balancer is a novel rotor balancing tool. It consists of VibeSense wireless accelerometer and a miniature laser tachometer sensor.
VibeSense wireless accelerometer utilizes a piezoelectric accelerometer to guarantee accurate acceleration measurement. It has a powerful onboard processor to process both accelerometer and tachometer signals, perform FFT and calculate vibration and phase readings for rotor balancing. Wireless signal transmission is achieved by Bluetooth Low Energy that allows users to directly communicate with the sensors and perform balancing work on a smart phone or tablet.
The miniature laser tachometer can be attached to the VibeSense wireless accelerometer through the connector on top for phase measurement. With the included right-angle adapter, users can easily adjust and target the laser at any spot on the testing rotor. An extension cable can also be used to extend the laser reach.
Both single plane and two plane, inbound and overhung balancing are supported in our mobile App. With the animated step by step guide, anybody is able to accomplish rotor balancing work effortlessly. After balancing, a PDF report will be generated and saved for further assessment.
VibeSense runs on a rechargeable Li-Po battery with Qi wireless charging enabled.
- Accelerometer Type: Piezoelectric
- Sensitivity: 100mV/g
- Measurement Range: ±20g
- Frequency Range (±3dB): 25 – 600,000cpm
- Resonance Frequency: 2040kcpm
- ADC: 16bits
- Sampling Rate: 200 to 20000Hz
- Data Block Size: 256 to 16384 samples
- Spectrum Range: 1 to 10000Hz
- Data Transmission Range: 66ft / 20m
- Operating Temperature: -4 to 140°F
- Dust/Water Protection: IP66
- Battery: Li-Po battery w/ Qi Wireless Charging
VibeSenseRB is an iOS application that collects vibration amplitude and phase information through VibeSense wireless sensor to balance rotating machinery in a single plane and two planes.
- Wireless sensor connection via Bluetooth Low Energy
- Multiple sensor connectivity
- Supports single plane and two plane balancing
- Supports inbound and overhung
- Step-by-step guide for balancing
- Polar plot for vibration and trial/correction weights
- Angular mass distribution calculator
- Weight removal calculator
- Permissible residual imbalance determination
- ISO10816 based vibration meter
- Vibration raw signal recording
- Vibration signal FFT spectrum viewer
- Balancing PDF report
VibraTestPro is a universal app that turns an iPhone/iPad into a vibration analyzer. It provides comprehensive vibration analysis features, such as a real-time waveform and spectrum viewer, an ISO10816 vibration meter, raw signal recording, and more.
- VibraTestPro is universal on iPhone and iPad, turning your mobile device at hand into a competent portable vibration analyzer
- Severity test based on ISO10816-3 standard or custom thresholds
- Interactive ISO-10816 vibration severity table
- Enlarged severity bar with 4 color zones for better view
- Machine type and support type selections
- RMS data and color code save to local data manager
- 2-CH simultaneous display
- Real-time waveform and FFT spectrum
- Interactive signal viewer with pan and pinch to move and zoom spectrum
- Customizable graph appearance: background color, line color,line thickness, dynamic grids
- Linear and log axis scale
- Full-screen display
- Velocity and acceleration readings
- Metric and Imperial units
- Vibration signal information including overall RMS, major frequency and top 5 peaks
- Auto peak detection cursor and manual peak cursor
- Movable distance cursors to analyze two points in spectrum
- Harmonic cursors to show vibration harmonics
- Sideband cursors with options to define center frequency, number of sidebands and frequency interval
- Raw vibration signal recording
- User-defined recording sampling rate and length
- Recording manual or auto stop
- Recorded data export in CSV/WAV file via AriDrop, Email, Dropbox
- Recorded data save to local data manager
- Plant-Machine-Test Point structure for easy data management
- Save machine image to record
- Save test note to record
- Offline spectrum
- Export vibration signal
- VibraTestPro supports Motionics VibeSense Wireless Vibration Sensor to offer a wireless solution for condition monitoring of rotating machinery
What’s in the box:
- VibeSense Wireless Accelerometer
- Adjustable Laser Tachometer Sensor
- Laser Tachometer Extension Cable
- Laser Tachometer Holder
- Qi Wireless Charging Pad
- 1/4-28 Accelerometer Mounting Set Screw
- Magnet Key for Sensor on/off Switch
- Protective Carrying Case
- VibeSenseRB App (iPad)
- VibraTestPro App (iPhone&iPad)
- iPad Mini 5 with Industrial Protective Case (Optional)
- Two Pole 85 lbs Magnetic Base (Optional)
Brochure
User Manual
Full Product Catalog
VibraTestPro Sample Data (CSV)
VibraTestPro Sample Data (WAV)
Reviews
There are no reviews yet.